Klinger Reflex Level gauge B0, 95x34x17mm
incl. graphite gasket set PSM/B/AS.

Gasket PSM/B/AS for Level gauge B9, size: 340x34x1,5mm.
2 pieces = 1 set.

Gasket PSM/B/AS for Level gauge B8, size: 320x34x1,5mm.
2 pieces = 1 set.

Gasket PSM/B/AS for Level gauge B7, size: 280x34x1,6mm.
2 pieces = 1 set.

Gasket PSM/B/AS for Level gauge B6, size: 250x34x1,6mm.
2 pieces = 1 set.

Gasket PSM/B/AS for Level gauge B5, size: 220x34x1,5mm.
2 pieces = 1 set.

Gasket PSM/B/AS for Level gauge B4, size: 190x34x1,5mm.
2 pieces = 1 set.

Gasket PSM/B/AS for Level gauge B3, size: 165x34x1,5mm.
2 pieces = 1 set.

Gasket PSM/B/AS for Level gauge B2, size: 140 x 34 x 1,5 mm
2 pieces = 1 set.

Gasket PSM/B/AS for Level gauge b1,
size: 115 x 34 x 1,5 mm
2 pieces = 1 set

Gasket PSM/B/AS for Level gauge b0,
size: 95 x 34 x 1,5 mm
2 pieces = 1 set

Klinger Reflex Level gauge B10,370x34x17mm,
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B9, 340x34x17mm,
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B8, 320x34x17mm,
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B7, 280x34x17mm,
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B6, 250x34x17mm
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B5, 220x34x17mm,
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B4, 190x34x17mm,
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B3, 165x34x17mm
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B2, 140x34x17mm,
incl. graphite gasket set PSM/B/AS.

Klinger Reflex Level gauge B1, 115x34x17mm
incl. graphite gasket set PSM/B/AS.

Gasket ring graphite AB 18

Gasket ring graphite AB 12

Revision setset complete for Klinger D8 valveset, consisting of:
1x 5341002299012: gasket ring graphite AB 12
2x 5341002299018: Gasket ring graphite AB 18
2x 5311006919004: Level gauge ring KU 16 graphite
2x 11200240015015: Head ring 24/15x1,5 C4500
2x 5311006919021: Pin ring 14/8x2 copper
1x 5311006919022: Drain valve gasket 27x21x1,5mm
1x 11200180010015: Drain valve gasket 3/8'', 18/10x1,5 C 4500

Drain valve gasket 27 x 21 x 1,5 mm

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.