Kuiper en Zonen B.V. Webshop

Revision setset complete for Klinger D8 valveset, consisting of: 1x 5341002299012: gasket ring graphite AB 12 2x 5341002299018: Gasket ring graphite AB 18 2x 5311006919004: Level gauge ring KU 16 graphite 2x 11200240015015: Head ring 24/15x1,5 C4500 2x 5311006919021: Pin ring 14/8x2 copper 1x 5311006919022: Drain valve gasket 27x21x1,5mm 1x 11200180010015: Drain valve gasket 3/8'', 18/10x1,5 C 4500

Learn More

Steel downwards crane- Type D - FS/H / DN20

Under valve type D, DN20, FS/H incl. drain valve type ABL12

Learn More

Wafer type check valve RITAG - Fig. 2636 - DN 125 / PN 40

Econ® steel wafer type disc check valves with spring-loaded disc, metal seated, stainless steel trim, pressure rating PN 40, standard suitable for mounting between flanges acc. to DIN PN 6-40, short Face To Face, low weight and low pressure loss. Suitable for horizontal and vertical installation.

Learn More

Rayon heating patent valve Econ - Fig. 2433 - DN 125 / PN 6

Econ® cast iron Rayon CV patent valves are specially designed for central heating installations with. Unique in its design is the combination of an extremely low flow resistance, and the low maintenance stem seal with "back seat".

Learn More

Pressure relief valve ARI 12.901 - Fig. 566 - In DN 80 / Out DN 125 / PN 16

Econ® full lift safety valves are mainly applied for vapours and gases, for steam application we advice to use figure 564. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.901 - Fig. 566 - In DN 65 / Out DN 100 / PN 16

Econ® full lift safety valves are mainly applied for vapours and gases, for steam application we advice to use figure 564. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.901 - Fig. 566 - In DN 50 / Out DN 80 / PN 16

Econ® full lift safety valves are mainly applied for vapours and gases, for steam application we advice to use figure 564. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.901 - Fig. 566 - In DN 40 / Out DN 65 / PN 16

Econ® full lift safety valves are mainly applied for vapours and gases, for steam application we advice to use figure 564. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.901 - Fig. 566 - In DN 32 / Out DN 50 / PN 16

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.901 - Fig. 566 - In DN 25 / Out DN 40 / PN 16

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.902 - Fig. 564 - In DN 80 / Out DN 125 / PN 16

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.902 - Fig. 564 - In DN 65 / Out DN 100 / PN 16

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.902 - Fig. 564 - In DN 50 / Out DN 80 / PN 16

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.902 - Fig. 564 - In DN 40 / Out DN 65 / PN 16

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.902 - Fig. 564 - In DN 32 / Out DN 50 / PN 16

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Learn More

Pressure relief valve ARI 12.902 - Fig. 564 - In DN 25 / Out DN 40 / PN 16

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Learn More

Globe valve ARI 35.046 Plug with marginal seat - Fig. 153 - DN 125 / PN 40

Cast steel Econ® bellow sealed globe valves, SS trim, pressure rating PN25/40, straight pattern, flanged ends acc. to DIN PN 25/40, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 250 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 200 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 150 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 125 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 100 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 80 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 65 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 50 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 40 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 32 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 25 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 20 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 15 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve fixed disc - Fig. 247 - DN 125 / PN 16

Econ® ductile cast iron globe valves with stainless steel trim, pressure rating PN 16, straight pattern, flanged ends acc. to DIN PN 10/16, outside screw & yoke and rising handwheel.

Learn More

Globe valve fixed disc - Fig. 417 - DN 125 / PN 40

Econ® cast steel globe valves with stainless steel trim, pressure rating PN 16 - 40, straight pattern, flanged ends acc. to DIN PN16/40, outside screw & yoke and rising handwheel.

Learn More

Globe valve Fixed disc - Fig. 241 - DN 125 / PN 16

Econ® cast iron globe valves with stainless steel trim, PN 16, straight pattern, flanged ends acc. to DIN PN10/16. Outside screw & yoke.

Learn More

Gate valve - Fig. 292 - DN 125 / PN 10

Cast iron Econ® gate valve with bronze seat, pressure rating PN 2,5/6/10, flanged ends acc. to DIN PN 10, bolted bonnet, inside screwed stem, non-rising stem, non-rising handwheel, solid wedge, short Face To Face acc. to EN 558-1, 14 (DIN 3202-F4).

Learn More

Butterfly valve Econ - Fig. 6331 - DN 125 / PN 16 / EPDM

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Learn More

Butterfly valve Econ - Fig. 6331 - DN 125 / PN 16 / NBR

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Learn More

Y-filter Econ - Fig. 1019 - 1,6 MM / DN 125 / PN 16

Econ® cast iron strainer for general use. Suitable for use in horizontal and vertical pipelines with a downward flow.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 100 / PN 1/6

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 15 / PN 1/6

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 300 / PN 10/10

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 250 / PN 40/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 250 / PN 25/25

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 250 / PN 16/16

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 250 / PN 10/10

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 200 / PN 40/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 200 / PN 25/25

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 200 / PN 10/16

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 200 / PN 1/6

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 150 / PN 25/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 150 / PN 10/16

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 100 / PN 25/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 100 / PN 10/16

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 80 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 65 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 65 / PN 1/6

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 50 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 50 / PN 1/6

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 40 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 32 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 32 / PN 1/6

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 25 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 20 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 15 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Graphite flange gasket DIN - Fig. 1012532 - DN 10 / PN 10/40

Econgraph®-TI is a reinforced graphite sheet with an insert of tanged SS-316 sheet with a thickness of 0,10 mm. No adhesive is required to bond the graphite layers to the insert as the graphite material is fixed to the insert by small, sharp teeth. We strongly advise against cutting gaskets by hand. Our cutting department has the correct tools to make the gaskets for you. Econgraph®-TI is very often used in flange joints for pipes and machinery. The high temperature range and the excellent residual stress make our Econgraph®-TI very suitable for use in steam systems, in the chemical and petrochemical industries, the process industry etc. In short, an exceptional and very versatile sealing material.

Learn More

Glass cord square - 12x12MM / 30M

Type 2010
Diagonally braided packing, manufactured from 100% pure PTFE yarns. The packing is vacuum impregnated with a PTFE dispersion and an additional lubricant.

Application Area
Tank hatches, mixers, chemical industry and petrochemical industry

Medium
Weak & strong acids, Weak & strong salts, food and solvents.

Learn More