Kuiper en Zonen B.V. Webshop

Learn More

Spring loaded safety relief valve cast iron - 441/442 - In DN32 / Out DN50 / PN 16

LESER full lift safety valve (spring type)

Learn More

Spring loaded safety relief valve cast iron - 441/442 - In DN25 / Out DN40 / PN 16

LESER full lift safety valve (spring type)

Learn More

Spring loaded safety relief valve cast iron - 441/442 - In DN20 / Out DN32 / PN 16

LESER full lift safety valve (spring type)

Learn More

Reflex gauge glass - B0 - 95x34x17MM

Klinger Reflex Level gauge B0, 95x34x17mm incl. graphite gasket set PSM/B/AS.

Learn More

Ball-float steam trap - UNA14 - hor. / AO13 / Flange connection / DN25 / PN25

Klinger Reflex Level gauge B2, 140x34x17mm, incl. graphite gasket set PSM/B/AS.

Learn More

Reflex gauge glass - B1 - 115x34x17MM

Klinger Reflex Level gauge B1, 115x34x17mm incl. graphite gasket set PSM/B/AS.

Learn More

Learn More

Wafer type check valve RITAG - Fig. 2636 - DN 150 / PN 40

Econ® steel wafer type disc check valves with spring-loaded disc, metal seated, stainless steel trim, pressure rating PN 40, standard suitable for mounting between flanges acc. to DIN PN 6-40, short Face To Face, low weight and low pressure loss. Suitable for horizontal and vertical installation.

Learn More

Wafer type check valve RITAG - Fig. 2636 - DN 125 / PN 40

Econ® steel wafer type disc check valves with spring-loaded disc, metal seated, stainless steel trim, pressure rating PN 40, standard suitable for mounting between flanges acc. to DIN PN 6-40, short Face To Face, low weight and low pressure loss. Suitable for horizontal and vertical installation.

Learn More

Wafer type check valve RITAG - Fig. 2636 - DN 100 / PN 40

Application
Cold and hot water, oil, air, gases and other neutral media. Disc type check valves can also be used as vacuum breaker.

Econ® cast iron Rayon CV patent valves are specially designed for central heating installations with. Unique in its design is the combination of an extremely low flow resistance, and the low maintenance stem seal with "back seat".
Through the smooth long neck and standard insulation cap the Econ® Rayon CV patent valves can be easily and effectively insulated, also with cooling applications.

Econ® lift safety valves are mainly applied for vapours (including steam) and gases. Suitable for liquids in large volumes.

Econ® bronze globe valves with bronze disc and seat, pressure rating PN 16, straight pattern, flat faced flanges acc. to DIN PN 16, threaded and secured bonnet, inside screwed stem and rising handwheel.

Learn More

Globe valve Fixed disc - Fig. 275 - DN 15 / PN 16

Econ® bronze globe valves with bronze disc and seat, pressure rating PN 16, straight pattern, flat faced flanges acc. to DIN PN 16, threaded and secured bonnet, inside screwed stem and rising handwheel.

Cast steel Econ® bellow sealed globe valves, SS trim, pressure rating PN25/40, straight pattern, flanged ends acc. to DIN PN 25/40, outside screwed stem and non-rising handwheel.

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Learn More

Globe valve ARI 12.046 Plug with marginal seat - Fig. 126 - DN 15 / PN 16

Cast iron Econ® bellow sealed globe valves, SS trim, pressure rating PN16, straight pattern, flanged ends acc. to DIN PN 16, outside screwed stem and non-rising handwheel.

Econ® ductile cast iron globe valves with stainless steel trim, pressure rating PN 16, straight pattern, flanged ends acc. to DIN PN 10/16, outside screw & yoke and rising handwheel.

Learn More

Globe valve fixed disc - Fig. 247 - DN 15 / PN 16

Econ® ductile cast iron globe valves with stainless steel trim, pressure rating PN 16, straight pattern, flanged ends acc. to DIN PN 10/16, outside screw & yoke and rising handwheel.

Econ® cast steel globe valves with stainless steel trim, pressure rating PN 16 - 40, straight pattern, flanged ends acc. to DIN PN16/40, outside screw & yoke and rising handwheel.

Learn More

Globe valve - Fig. 254 - DN 15 / PN 32

Econ® bronze globe valves with brass trim, fitted with PTFE disc ring, pressure rating PN 32, straight pattern, flat faced flanges, threaded bonnet, inside screwed stem and rising handwheel.

Econ® cast iron globe valves with stainless steel trim, PN 16, straight pattern, flanged ends acc. to DIN PN10/16. Outside screw & yoke.

Econ® ductile cast iron butterfly valve, semi-monoflange type with centric disc, split shafts and rubber lined body.

Econ® cast iron strainer for general use. Suitable for use in horizontal and vertical pipelines with a downward flow.

Econ® bronze strainer for general use. BSP female threaded connection acc. to DIN 259, stainless steel strainer element and threaded cap. Suitable for use in horizontal and vertical pipelines with a downward flow.

Learn More

Pressure gauge siphon - Fig. 350 - 1/4" / PN 25

Seamless Steel siphon pipe with threaded connections.

Learn More

Pressure gauge siphon - Fig. 350 - 1/2" / PN 25

Seamless Steel siphon pipe with threaded connections.

Medium
Weak & strong acids, Weak & strong salts, food and solvents.

Learn More

Glass cord round - 6MM / 30M

Type 2010
Diagonally braided packing, manufactured from 100% pure PTFE yarns. The packing is vacuum impregnated with a PTFE dispersion and an additional lubricant.

Application Area
Tank hatches, mixers, chemical industry and petrochemical industry

Medium
Weak & strong acids, Weak & strong salts, food and solvents.

Standard Econ® pressure gauge according to EN 837-1 for industrial applications. Suitable for clean and non-aggressive gas and liquid which do not affect the messing measuring system. Applicable in most industries in when positioned in a dry environment.

Standard Econ® pressure gauge according to EN 837-1 for industrial applications. Suitable for clean and non-aggressive gas and liquid which do not affect the messing measuring system. Applicable in most industries in when positioned in a dry environment.

Learn More

Bourdon tube pressure gauge Econ - Fig. 330 - 100 MM / 0 - 0,6 BAR

Standard Econ® pressure gauge according to EN 837-1 for industrial applications. Suitable for clean and non-aggressive gas and liquid which do not affect the messing measuring system. Applicable in most industries in when positioned in a dry environment.

Econ ® thermometers to EN Standard 13190, suitable for general and industrial environment. With removable brass thermowell secured by a locking screw.

Learn More

Bimetal thermometer Econ - Fig. 661 - 80 MM / -30 - 50 °C / Insert length 40 MM

Econ ® thermometers to EN Standard 13190, suitable for general and industrial environment. With removable brass thermowell secured by a locking screw.

Econ® brass nickel-plated ball valve with full bore floating ball. Pressure rating PN80/5040/25/16. This ball valve has female thread connections according to NEN-EN 10226-1 (ISO7-1). Actuated by aluminium lever. This type of ball valve is generally applicable, e.g. for compressed air, HVAC and water systems up to maximum 80 bar, depending on the size. See pressure rating table.

Learn More

Ball valve Econ - Fig. 1607 - 1/4" / BSPP

Econ® brass nickel-plated ball valve with full bore floating ball. Pressure rating PN80/5040/25/16. This ball valve has female thread connections according to NEN-EN 10226-1 (ISO7-1). Actuated by aluminium lever. This type of ball valve is generally applicable, e.g. for compressed air, HVAC and water systems up to maximum 80 bar, depending on the size. See pressure rating table.

Learn More

Ball valve Econ - Fig. 1942M - DN 15 / PN 16

Econ® ball valve with full bore, floating ball and flange connection rated DIN PN16. This ball valve is available in cast iron. Actuated by lever. Also available with a pneumatic or electric actuator. This type of ball valve is generally used in heating, air conditioning and industrial systems for water and gases up to a maximum of 16 bar (PN16 version).

Econ® ball valve with full bore, floating ball and flange connection rated DIN PN16. This ball valve is available in cast iron. Actuated by lever. Also available with a pneumatic or electric actuator. This type of ball valve is generally used in heating, air conditioning and industrial systems for water and gases up to a maximum of 16 bar (PN16 version).

Econ® ball valve with full bore, floating ball and flange connection rated DIN PN16. This ball valve is available in cast iron. Actuated by lever. Also available with a pneumatic or electric actuator. This type of ball valve is generally used in heating, air conditioning and industrial systems for water and gases up to a maximum of 16 bar (PN16 version).

Econ® two-piece ball valve with full bore, floating ball and flange connection to DIN PN16 or PN40. Actuated by means of a lever, T-bar or gearbox. This type of ball valve is generally used in industrial systems such as water, gases, and corrosive media, up to a maximum of 40 bar (PN40 version).

Design according to EN ISO 17292, EN12516-1, flanges: EN 10921, face to face: EN 558-127 (short), testing: EN 12266 class A (100%), fire safe to API 607 5th edition.

Learn More

Login Form

Registration

Search results for '1'